SafeSpeed wrote:
What use is your speedo to safety?
Taking your points 1-3 first...
1. I sometimes use the speedo for this if, as you say, the approach is clear of traffic, though typically I'll just rely on observing my rate of closure as if I were braking for a slower/stationary vehicle ahead of me.
2. Been too long since I last drove a manual without a rev counter to be sure of how I judged the change point, though I have a feeling it was more down to engine note and getting used to how long it would typically take to reach the change point for a given amount of right foot movement, than from the speedo. Certainly on manuals with rev counters, the speedo didn't get a look-in.
3. I prefer close observation of whatever is in L1, combined with brisk acceleration (provided there isn't someone in front of me who thinks 30 is an acceptable speed to try merging at...), than trying to match speeds numerically - plenty of times I've been following HGVs that are clearly *not* limited to 56 for me to feel happy about assuming they won't be doing more than that as I try merging in with them.
So, to answer your question. My speedo is useful for keeping my licence safe when driving past a camera site. I honestly can't think of any situation where I've needed to know my absolute speed in order to *drive* safely.
When my ABS control module went tits-up last year it left me without a speedo for, eventually, the entire duration of a journey. The only thing I missed it for was double-checking my speed in camera-infested areas, and for that I was able to get by with a handheld GPS wedged in the corner of the windscreen until I got the module replaced just prior to the MOT. Did I have any accidents because of not knowing my numerical speed? No. Did I have any near-misses? No. Would I describe my driving as being any less safe to myself or any other road user? No.