Sixy_the_red wrote:
For the life of me I can't think of the correct name for the painted area in the middle of the road used for turning righ, but anyway...
Its fairly obvious that you can use the area when turning right off the main carriageway, but what about when you're trying to turn right ONTO the main carriageway? There have been times when I've been waiting to turn right at a busy junction and the only way to make it safely across is to cross the first line of traffic (approaching from the right) and then wait in the right turning area to join the flow of traffic approaching from the left.
Is this a legal / recognised way of making a safe turn or am I breaking the law? I can't find any specific reference in the highway code about it.
I would think that like any hatched area, it's OK to use it if bordered by broken line but not if bordered by solid line. I'm not sure if the HC has anything to say on using a hatched area when turing right from a minor to a major road but, as far I'm concerned, it's acceptable practice from legal and good driving perspectives, with two qualifications:
(a) make sure you don't obstruct the lane you're crossing. If the hatched area is not wide enough for the whole length of your vehicle, drive in on a diagonal (or parallel with the main road if necessary, but this makes it harder to spot a gap in the line of traffic you're joining);
(b) don't make your move across to the hatched area aggressively or in a way which may make drivers in the lane you wish to join think that you're going to 'barge in'.
[edited to add]
(c) move 'downstream' (from pov of your intended direction of travel) of the minor road so you don't obstruct traffic wishing to turn right into it.